Class 10 SELINA Solutions Maths Chapter 19 - Constructions (Circles)
Constructions (Circles) Exercise Ex. 19
Solution 1
Steps Of Construction:
i) Draw a circle with centre O and radius 3 cm.
ii) From O, take a point P such that OP = 5 cm
iii) Draw a bisector of OP which intersects OP at M.
iv) With centre M, and radius OM, draw a circle which intersects the given circle at A and B.
v) Join AP and BP.
AP and BP are the required tangents.
On measuring AP = BP = 4 cm
Solution 2
- Draw a circle of diameter 9 cm, taking O as the centre.
- Mark a point P outside the circle, such that PO = 7.5 cm.
- Taking OP as the diameter, draw a circle such that it cuts the earlier circle at A and B.
- Join PA and PB.
Solution 3
Steps of Construction:
i) Draw a circle with centre O and radius BC = 5 cm
ii) Draw arcs making an angle of 180º - 45º = 135º at O such that AOB = 135º
iii) AT A and B, draw two rays making an angle of 90º at each point which meet each other at point P, outside the circle.
iv) AP and BP are the required tangents which make an angle of 45º with each other at P.
Solution 4
Steps of Construction:
i) Draw a circle with centre O and radius BC = 4.5 cm
ii) Draw arcs making an angle of 180º - 60º = 120º at O such that AOB = 120º
iii) AT A and B, draw two rays making an angle of 90º at each point which meet each other at point P, outside the circle.
iv) AP and BP are the required tangents which make an angle of 60º with each other at P.
Solution 5
Steps of construction:
i) Draw a line segment BC = 4.5 cm
ii) With centers B and C, draw two arcs of radius 4.5 cm which intersect each other at A.
iii) Join AC and AB.
iv) Draw perpendicular bisectors of AC and BC intersecting each other at O.
v) With centre O, and radius OA or OB or OC draw a circle which will pass through A, B and C.
This is the required circumcircle of triangle ABC.
On measuring the radius OA = 2.6 cm
Solution 6
Steps of Construction:
i) Construction of triangle:
a) Draw a line segment BC = 7 cm
b) At B, draw a ray BX making an angle of 45o and cut off BE = AB - AC = 1 cm
c) Join EC and draw the perpendicular bisector of EC intersecting BX at A.
d) Join AC.
is the required triangle.
ii) Construction of incircle:
e)
Draw angle bisectors of and
intersecting
each other at O.
f) From O, draw perpendiculars OL to BC.
g)
O as centre and OL as radius draw circle which touches the sides of the .
This is the required in-circle of
.
On measuring, radius OL = 1.8 cm
Solution 7
Steps of Construction:
i) Draw a line segment BC = 5 cm
ii) With centers B and C, draw two arcs of 5 cm radius each which intersect each other at A.
iii) Join AB and AC.
iv)
Draw angle bisectors of and
intersecting
each other at O.
v)
From O, draw .
vi)Now
with centre O and radius OL, draw a circle which will touch the sides of
On measuring, OL = 1.4 cm
Solution 8
Steps of construction:
i) Draw a line segment AB = 6 cm
ii) At A, draw a ray making an angle of 60o with BC.
iii) With B as centre and radius = 6.2 cm draw an arc which intersects AX ray at C.
iv) Join BC.
is the required triangle.
v) Draw the perpendicular bisectors of AB and AC intersecting each other at O.
vi) With centre O, and radius as OA or OB or OC, draw a circle which will pass through A, B and C.
vii)
From O, draw .
Proof:
In right and
OA = OB (radii of same circle)
Side OD = OD (common)
Solution 9
Steps of Construction:
i)Draw a line segment BC = 4 cm.
ii) At C, draw a perpendicular line CX and from it, cut off CE = 2.5 cm.
iii) From E, draw another perpendicular line EY.
iv) From C, draw a ray making an angle of 45o with CB, which intersects EY at A.
v) Join AB.
is the required triangle.
vi) Draw perpendicular bisectors of sides AB and BC intersecting each other at O.
vii) With centre O, and radius OB, draw a circle which will pass through A, B and C.
Measuring the radius OB = OC = OA = 2 cm
Solution 10
i)
O is called the circumcentre of circumcircle of .
ii) OA, OB and OC are the radii of the circumcircle.
iii) Yes, the perpendicular bisector of BC will pass through O.
Solution 11
i)
O is called the incentre of the incircle of .
ii) OR and OQ are the radii of the incircle and OR = OQ.
iii) OC is the bisector of angle C
Solution 12
Steps of Construction:
i) Draw a line segment BC = 6 cm.
ii) With centre B and radius 8 cm draw an arc.
iii) With centre C and radius 5 cm draw another arc which intersects the first arc at A.
iv) Join AB and AC.
is the required triangle.
v) Draw the angle bisectors of intersecting each other at I. Then I is the incentre of the triangle ABC
vi) Through I, draw
vii) Now from D, cut off
viii) With centre I, and radius IP or IQ, draw a circle which will intersect each side of triangle ABC cutting chords of 2 cm each.
Solution 13
Steps of construction:
i) Draw a line segment BC = 6 cm
ii) With centers B and C, draw two arcs of radius 6 cm which intersect each other at A.
iii) Join AC and AB.
iv) Draw perpendicular bisectors of AC, AB and BC intersecting each other at O.
v) With centre O, and radius OA or OB or OC draw a circle which will pass through A, B and C.
This is the required circumcircle of triangle ABC.
Solution 14
Steps of Construction:
i) Draw a line segment BC = 5.6 cm
ii) With centers B and C, draw two arcs of 5.6 cm radius each which intersect each other at A.
iii) Join AB and AC.
iv)
Draw angle bisectors of and
intersecting
each other at O.
v)
From O, draw .
vi)Now
with centre O and radius OL, draw a circle which will touch the sides of
This is the required circle.
Solution 15
Steps of Construction:
i) Draw a regular hexagon ABCDEF with each side equal to 5 cm and each interior angle 120º.
ii) Join its diagonals AD, BE and CF intersecting each other at O.
iii) With centre as O and radius OA, draw a circle which will pass through the vertices A, B, C, D, E and F.
This is the required circumcircle.
Solution 16
Steps of Construction:
i) Draw a line segment AB = 5.8 cm
ii) At A and B, draw rays making an angle of 120o each and cut off AF = BC = 5.8 cm
iii) Again F and C, draw rays making an angle of 120o each and cut off FE = CD = 5.8 cm.
iv) Join DE. Then ABCDEF is the regular hexagon.
v) Draw the bisectors of intersecting each other at O.
vi) From O, draw
vii) With centre O and radius OL, draw a circle which touches the sides of the hexagon.
This is the required in circle of the hexagon.
Solution 17
Steps of Construction:
(i) Draw a circle of radius 4 cm with centre O
(ii)
Since the
interior angle of regular hexagon is 60o, draw radii OA and OB
such that
(iii) Cut off arcs BC, CD, EF and each equal to arc AB on given circle
(iv) Join AB, BC, CD, DE, EF, FA to get required regular hexagon ABCDEF in a given circle.
The circle is the required circum circle, circumscribing the hexagon.
Solution 18
Steps of Construction:
i) Draw a line segment OP = 6 cm
ii) With centre O and radius 3.5 cm, draw a circle
iii) Draw the midpoint of OP
iv) With centre M and diameter OP, draw a circle which intersect the circle at T and S
v) Join PT and PS.
PT and PS are the required tangents. On measuring the length of PT = PS = 4.8 cm
Solution 19
i.
- Draw a line BC = 5.4 cm.
- Draw AB = 6 cm, such that m∠ABC = 120°.
- Construct the perpendicular bisectors of AB and BC, such that they intersect at O.
- Draw a circle with O as the radius.
ii.
(e) Extend the perpendicular bisector of BC, such that
it intersects the circle at D.
(f) Join BD and CD.
(g) Here BD = DC.
Solution 20
Solution 21
Solution 22
Solution 23
Steps of construction:
- Draw AF measuring 5 cm using a ruler.
- With A as the centre and radius equal to AF, draw an arc above AF.
- With F as the centre, and same radius cut the previous arc at Z
- With Z as the centre, and same radius draw a circle passing through A and F.
- With A as the centre and same radius, draw an arc to cut the circle above AF at B.
- With B as the centre and same radius, draw an arc to cut the circle at C.
- Repeat this process to get remaining vertices of the hexagon at D and E.
- Join consecutive arcs on the circle to form the hexagon.
- Draw the perpendicular bisectors of AF, FE and DE.
- Extend the bisectors of AF, FE and DE to meet CD, BC and AB at X, L and O respectively.
- Join AD, CF and EB.
These are the 6 lines of symmetry of the regular hexagon.
Solution 24
Steps for construction:
- Draw AB = 5 cm using a ruler.
- With A as the centre cut an arc of 3 cm on AB to obtain C.
- With A as the centre and radius 2.5 cm, draw an arc above AB.
- With same radius, and C as the centre draw an arc to cut the previous arc and mark the intersection as O.
- With O as the centre and radius 2.5 cm, draw a circle so that points A and C lie on the circle formed.
- Join OB.
- Draw the perpendicular bisector of OB to obtain the mid-point of OB, M.
- With the M as the centre and radius equal to OM, draw a circle to cut the previous circle at points P and Q.
- Join PB and QB. PB and QB are the required tangents to the given circle from exterior point B.
QB = PB = 3 cm
That is, length of each tangent is 3 cm.
Solution 25
Steps of construction :
1. Draw a line AB = 7 cm
2. Taking P as centre and same radius, draw an arc of a circle which intersects AB at M.
3. Taking M as centre and with the same radius as before drawn an arc intersecting previously drawn arc, at point N.
4. Draw the ray AX passing through N,
then
5. Taking A as centre and radius equal to 5 cm, draw an arc cutting AX at C.
6. Join BC
7. The required triangle ABC is obtained.
8. Draw angle bisector of ∠CAB and ∠ABC
9. Mark their intersection as O
10. With O as center, draw a circle with radius OD
Solution 26
Steps for construction :
i. Draw BC = 6.8 cm.
ii. Mark point D where BD = DC = 3.4 cm which is mid-point of BC.
iii. Mark a point A which is intersection of arcs AD = 4.4 cm and AB = 5 cm from a point D and B respectively.
iv. Join AB, AD and AC.
ABC is the required triangle.
v. Draw bisectors of angle B and angle C which are ray BX and CY where I is the incentre of a circle.
vi. Draw incircle of a triangle ABC.
Solution 27
Steps for construction :
i. Draw concentric circles of radius 4 cm and 6 cm with centre of O.
ii. Take point P on the outer circle.
iii. Join OP.
iv. Draw perpendicular bisectors of OP where M is the midpoint of OP.
v. Take a distance of a point O from the point M and mark arcs from M on the inner circle it cuts at point A and B respectively.
vi. Join PA and PB.
We observe that PA and PB are tangents from outer circle to inner circle are equal of a length 4.5 cm each.
Solution 28
Steps for construction :
i. Draw BC = 7.2 cm.
ii. Draw an angle ABC = 90° using compass.
iii. Draw BD perpendicular to AC using compass.
iv. Join BD.
v. Draw perpendicular bisectors of AB and BC which intersect at I, where I is the circumcentre of a circle.
vi. Draw circumcircle using circumcentre I. we get radius of a circle is 4.7 cm.